Posts Tagged ‘Willcox’

Why Select a Two Stage AC vs. Single Stage Air Conditioner: A Guide From Willcox

Friday, September 2nd, 2011

When you are in the market for a new air conditioner in Willcox, one of the decisions you will have to make is whether you want a two stage system or one that only functions in a single stage. Of course, before you can make a decision about this, you need to know what all of this means.

A single stage air conditioning system is probably what you are most familiar with. They have been around for longer and can be found in a wide variety of locations. Single stage air conditioners come on at full capacity when the temperature in your home rises above the preset level on the thermostat. Once they have effectively cooled the house, these types of air conditioners shut off until the temperature works its way back up again.

Two stage air conditioners, on the other hand, can function at either 67% or 100% of capacity depending on exactly how warm it is in your home. What that really means is that if the temperature in your home is only a little above the thermostat’s preset limit, the air conditioning system will come on at 67% and gradually cool the house to keep it right in a comfortable range.

However, if you have not been home for a while and your home has gotten very warm inside, your air conditioner will come on at full power to get the temperature down quickly. What this really means is that your air conditioner will be running more than a single stage air conditioner because it will sometimes not be using all of its power to cool.

The end result of using a two stage air conditioner is that you will receive a relatively continuous flow of cool air throughout your home. A two stage air conditioner will send in a steady but smaller stream of cooled air as opposed to the large blast of cold air you would get from a single stage system.

This results in a more consistent and comfortable environment overall, and it also makes it possible for the air conditioning system to dehumidify your house more effectively. When the air is cooled too quickly, the dehumidification system does not always have time to do its job. But with the longer cooling cycles of the two stage system, there is plenty of time to make sure the right amount of humidity is removed from the air.

Tags: , , ,
Posted in Air Conditioning | Comments Off

Air Conditioners and Energy Use by Percentage

Monday, July 25th, 2011

It’s no secret that air conditioners use up a lot of electricity and can add substantially to your energy bills during those warm summer months. But did you know that they actually account for an estimated 11% of the total energy used in all buildings in the US each year? This is a staggering figure and makes it easy to see why it’s best to invest in the most energy efficient system possible.

Keeping Your Consumption Down

There are plenty of reasons to try and keep your energy consumption down. You want to save on your energy bills, and the less energy you use, the better it is for the environment. The best and most straightforward way to go about this is to purchase only highly energy efficient appliances and equipment, and that includes air conditioners.

Because air conditioner usage accounts for such a substantial part of the total energy used in this country, putting more energy efficiency models into use is the best way to cut that usage down.

Supplementary Cooling

However, there are other ways to reduce the workload of your air conditioner. For instance, you can use a ceiling fan to maintain good air circulation and keep your home cool. Using a ceiling fan with an air conditioner, even on the hottest days of the year, allows you to turn up your thermostat a bit to conserve energy while still enjoying a comfortable indoor environment. And because ceiling fans use so little energy to operate, you’ll come out ahead on your energy bill.

Passive Cooling

There are also several passive cooling methods you can employ to keep the temperature in your home down. Blocking out sunlight is the most important of these, so keep your blinds closed on any windows that receive direct sunlight, particularly in the early afternoon. Alternately, you can have awnings put up, which allow you to block the direct sun while still keeping the blinds open.

Shade is another effective passive cooling device. Planting trees around your home to block out the sun at the hottest times of day is a totally energy-free way of keeping your home cool and reducing the workload on your air conditioning system. The less your air conditioner has to work, the less energy it consumes and the lower your energy bills will be.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

How to Use AC Most Efficiently

Monday, July 18th, 2011

Air conditioning is definitely something most of us wouldn’t want to try and get through the summer without. And for a lot of people, because of medical or other conditions, it’s an absolute necessity. But just because you need to run your AC unit all summer doesn’t mean you need to suffer under the weight of astronomical cooling costs.

So if you’re interested in ways to save on cooling without sacrificing comfort, here are a few tips to get you started:

  • Get a Programmable Thermostat – When you come home at the end of a long day, you want your home to be cool and comfortable. But if you only have a basic thermostat, you would have to leave your air conditioning on all day in order to make this possible. Paying to cool an empty house is probably the last thing you want to do. But what is the alternative?

    Programmable thermostats offer the best solution in a case like this. These devices can be easily integrated into just about any home air conditioning system and they allow you to set different temperatures for different times of the day. That means you can have your air conditioning off while you’re not home and set it to come on a half hour or so before you get there. This way, you get the pleasure of walking into a cool, comfortable house without paying extra to keep it that way when you’re not home.

  • Incorporate Passive Cooling – The design of your home and how you use it can also have an effect on how hard your air conditioning system needs to work. Taking steps as simple as closing the blinds to block out the afternoon sun, putting up awnings and making sure that the exterior of your home is painted a lighter color to reflect sunlight rather than a darker one that will absorb it are all excellent ways to reduce the load on your air conditioner.
  • Supplement Your System – You can also take a good chunk out of your cooling bills by using things like ceiling fans in conjunction with your air conditioner. A ceiling fan can effectively lower the indoor temperature several degrees on its own, allowing you to set your thermostat a little higher.

Air conditioning is a major expense that most of us are resigned to paying, but there’s no reason to pay more than necessary with so many strategies available to save money.

Tags: , , ,
Posted in Air Conditioning | Comments Off

Indoor Air Quality Options

Monday, July 11th, 2011

Maintaining high indoor air quality is always worth investing time and money in. After all, if the air inside your home isn’t healthy, it can cause all kinds of health problems for you and your family. The state of the art home heating and cooling systems we have today make it possible to enjoy a perfectly temperature controlled indoor environment all year long, but they also trap indoor air pollutants and contaminants inside without proper ventilation.

Choosing a System that Works

Luckily there are a number of great products out there designed to remove these pollutants before they cause you and your family discomfort or illness. Before you run out to buy a new system, however, you should first consider what each has to offer and what pollutants you need to remove. You might have some idea about this already, but the best thing to do is talk to a professional who can help assess your indoor air and determine which types of contaminants are most prevalent in your home.

Different types of indoor air cleaners are better at targeting different types of contaminants. For instance, HEPA filters can remove up to 99.97% of particulate contaminants that measure 0.3 microns or larger. This includes things like pollen, pet dander, dust mites and mold spores, so if these are the things you want to target, an indoor air system that uses HEPA filters is probably right for you.

However, if you’re more concerned with getting rid of smoke odors and cooking fumes, you probably want a system that targets even smaller particles. Air ionizers are more appropriate for these types of indoor air quality issues, as they can effectively remove much smaller particles than most HEPA filters. On the flip side, ionizers aren’t as efficient at removing the larger contaminant particles, so if you want to target both small and large contaminants, you need a system that combines both of these technologies.

Bacteria and viruses are also a problem when they find their way into your indoor air and they can be particularly tricky to get rid of. HEPA filters and air ionizers both have trouble completely eradicating these pathogens, but UV germicidal lights can be incorporated into your indoor air cleaning system to tackle biological contaminants effectively.

No matter what type of home air quality problem you have, there is a system on the market that will target and remove the pollutant. The key is to know which pollutants effect you the most and which products will do the best job of removing them from your home.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

How Do I Find the Right Size Unit for My Room?

Friday, July 1st, 2011

When buying an air conditioner, there are a lot of things you need to take into account. One of the most important is the size and power of the unit you choose. Air conditioners come in many different sizes, so if you really want to get the most out of your purchase, you need to do your research and pick one that fits your home like a glove.

Square Feet and BTUs

The best way to determine how large of an air conditioner you need is to match the number of BTUs the unit has to the square footage of the room you want to use it in. That means you need to know what room you’re buying it for before you make your purchase.

The number of BTUs needed goes up proportionately with the room size, so even if you don’t have exact measurements or if your room is oddly shaped, you can get a good idea of how large an air conditioner you need. For instance, a 400 to 550 square foot room is best served by an air conditioner with between 8,000 and 11,000 BTUs, while a room that’s only 250 square feet would probably be fine with a 6,000 BTU unit.

Bigger Isn’t Always Better

One of the most common mistakes people make when buying an air conditioner is to assume that the bigger the unit the better it will work. The truth is that buying an air conditioner that’s too big for your room is just as much of a waste as buying one that’s too small.

A larger air conditioner will cost more, and it will probably make the room too cold. It will also cycle on and off more frequently than a properly sized unit and it won’t be able to properly control the humidity level, leaving you with a cold, damp environment. That’s not very comfortable.

Other Factors

The square footage is definitely the most important piece of data you’ll need before buying a new air conditioner for any room in your house. But don’t forget to take some other factors into account as well. For instance, if the room has particularly high ceilings or receives a lot of direct sunlight, you’ll probably need a slightly more powerful unit than the straight square footage would indicate.

If you’re not sure how certain features of your home will impact your buying decision, call a professional who can help you get a more exact idea of what it will take to stay cool.

Tags: , , ,
Posted in Air Conditioning | Comments Off

How Much Will a High Efficiency Air Conditioner Save You?

Wednesday, June 8th, 2011

When it comes to your air conditioning system, the energy efficiency rating really does matter. While you may be paying a bit more for products with higher energy efficiency ratings to begin with, you will certainly save a significant amount on your monthly cooling bills in the years to come.

Before you can evaluate your options in terms of energy efficient air conditioners, however, you will need to know how their efficiency is represented. Most air conditioners come with what is called a seasonal energy efficiency rating (SEER). A higher SEER means a more energy efficient model, and likely a higher price tag as well.

But how much more energy efficient is a SEER 10 air conditioning unit as opposed to a SEER 11? Well, the truth is that it is about 7% more efficient. However, a SEER 14 will be 23% more efficient than a SEER 10, but only 5% more efficient than a SEER 13 model.

While all of these numbers can help give you some context in which to evaluate the various air conditioners out there, they can only go so far. Turning these percentages into dollars is what you really have to do when you are trying to figure out what your monthly or yearly savings will be.

So to give you a bit of perspective, imagine that your annual cooling costs come to around $480 with your current SEER 10 air conditioning system. If you choose to upgrade to a SEER 13, you will save somewhere in the neighborhood of $110. But if you opt for the SEER 14 instead, you will gain an annual savings of closer to $140 compared to your current bill.

Of course, the SEER of a particular air conditioner is not the only thing that will cause the price of the unit to rise, nor is it the only thing that can cause your monthly cooling costs to rise. Air conditioners also need to be matched to the size of the space they will be asked to keep cool.

If the unit you have is too small to effectively cool the area in question, you are likely paying more than necessary in terms of cooling costs for less than ideal results. Similarly, if your unit is too big, you will be paying too much no matter how high a SEER rating it has.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

Energy Efficient Home Cooling Tips

Friday, May 6th, 2011

Having an energy efficient air conditioning system in place is a great way to keep cool in the summer for less. But that is far from the only thing you can do to help reduce your energy bills throughout the hottest months of the year. In fact, there are several simple steps you can take to start cutting down on your cooling costs right now and lighten the cooling load that your air conditioning system has to bear.

One of the main things to remember when you are trying to keep your house cool is that every door and window is potentially letting in warmer air from outside and letting the cooler indoor air escape. You can cut down on this considerably if you simply take the time to seal up these access points and any others you are able to find.

Putting up plastic over unused doors and windows and checking all areas of the house for drafts and adequate insulation will dramatically reduce the cost of keeping your house cool in the summer. Also, you can keep the sun from warming up your indoor air by drawing the blinds, particularly on those windows that let in the hot afternoon sun.

Putting up light colored siding and reflective roofing will also do a great deal to keep your overall cooling costs down. That is because these materials are able to direct the heat of the sun away from your house rather than letting it be absorbed so that it can heat up the inside. The vast majority of the heat that your air conditioning system has to remove from your house comes in through your roof and walls, so blocking this access point is extremely helpful in keeping your overall cooling costs down.

All of these are steps you can take to reduce the total cooling load that your air conditioning system has to deal with. But if you want your system to continue to function at peak energy efficiency, you will have to take care of it as well.

This typically means having someone come in once a year to perform a thorough inspection of your air conditioning system and to clean out any debris that may have accumulated over time. Having this done will make it possible for your air conditioner to continue to function at the highest possible levels of energy efficiency for years to come.

Tags:
Posted in Air Conditioning | Comments Off